56/P Manual 4-12. Lining, Helmet, Shock (TPL) Custom-Fitting.   TM   1-8415-216-12&P INITIAL FITTING OF THE

Table 2-2. Test Set Initial Switch Positions Custom Search      Figure 2-3. Test Set Connections to Helicopter TM

2-6.  INITIAL ADJUSTMENTS, DAILY CHECKS,  AND SELF-TEST Custom Search      g. Taking Off Vest TM-1

a Turn on procedure:  Function               K35 switch   -   TEST   (information   will   appear after time delay period). b. Initial adjustments: (1)   BRT        control

5. MISSION CONTROL switch – OFF. DEPARTURE BRIEFING 1. ATC clearance – Review. a.   Routing. b.   Initial altitude. 2. Departure procedure

2. Emergency equipment. 3. Emergency landing/ditching procedures. DEPARTURE BRIEFING. ATC clearance - Review. 1. Routing. 2. Initial altitude. Departure procedure - Review

13 Aviation Intermediate Maintenance and Illustrated Parts Breakdown Manual Table 2-2. Test Set Initial Switch Positions   TM 55

AH-1  boresight  must  be adjusted  by  the  armament  technician  after  the  initial  fitting,  every 120  days

8415-206-12&P 3-12.  SEAL AND EAR CUP ASSEMBLY This task covers: Inspection INITIAL SETUP Personnel Required ALSE

12&P 3-14.   EAR CUPS This task covers: a.  Removal c.  Installation b.  Inspection INITIAL SETUP Personnel Required ALSE

CUSHION BACKING, EAR CUP ASSEMBLY This task covers: a.   Removal c.   Installation b.  Inspection INITIAL SETUP Personnel Required ALSE

17. THERMO PLASTIC LINER (TPL) This task covers: a.  Removal c.  Installation b.  Inspection INITIAL SETUP Personnel Required ALSE

8415-206-12&P 3-4.   VISOR HOUSING This task covers: a.  Inspection b.  Service INITIAL SETUP Materials/Parts Clean

AND EAR CUP ASSEMBLY   TM 10-8415-206-12&P 3-11.  BEADING This task covers: Inspection INITIAL SETUP Personnel Required ALSE

and 12 o'clock - Check. DEPARTURE BRIEFING 1. ATC clearance - Review. a. Routing. b. Initial altitude. 2. Departure procedure

206-12&P 3-15.   PAD, SPACER, AND EAR CUP ASSEMBLY This task covers: Inspection INITIAL SETUP Personnel Required ALSE

8415-206-12&P 3-6.  RETENTION ASSEMBLY This task covers: a.  Inspection b.  Adjustment INITIAL SETUP Personnel Required ALSE

8415-206-12&P 3-7.  SUSPENSION ASSEMBLY This task covers: a.  Inspection b.  Adjustment INITIAL SETUP Personnel Required ALSE

4-11.  VISOR This task covers: a.  Removal c.  Replacement b.  Inspection d.  Installation INITIAL SETUP Tools Screw Driver

12&P 3-9.  EAR CUP CROSS STRAPS This task covers: a.  Inspection b.  Adjustment INITIAL SETUP Personnel Required ALSE

10.  VISOR HOUSING This task covers: a.  Inspection c.  Replacement b.  Removal d.  Installation INITIAL SETUP Tools Screw Driver

SPH-4B Manual 3-19.  Edge Beading   TM 1-8415-215-12&P 3-18.  Chafing Pad. INITIAL SETUP TABLE TOOLS MATERIALS

Manual 3-11.  Communications Cord   TM 1-8415-215-12&P 3-10.  Microphone/Boom/Swivel Assembly. INITIAL SETUP TABLE TOOLS MATERIALS

be included in the table are referenced elsewhere in this manual. INITIAL SETUP Tools Aircraft armament

and   right   systems.   The   torque   and ITT should return to initial values, the PARTICLE

10-8415-206-12&P 3-5.  VISOR This task covers: a.  Inspection b.  Service INITIAL SETUP Materials/Parts Clean

PLASTIC LINER (TPL)   TM 10-8415-206-12&P 3-16.  OUTER SHELL This task covers: Inspection INITIAL SETUP Tools Screwdriver, 114

4B Manual 3-20.  Touch-up Painting.   TM 1-8415-215-12&P 3-19.  Edge Beading. INITIAL SETUP TABLE TOOLS MATERIALS

release switch   TM 1-5855-265-20 3-5 3-3.  MOVING PNVS TURRET ASSEMBLY MANUALLY INITIAL SETUP Tools Aircraft armament

and   ATTITUDE flags clear. (b)  AP  FAIL  and  AP  TRIM  FAIL  - Annunciators    illuminate    upon initial   application   of   AP

shall  sound  at  no  more  than  12,  and  no less than 4 knots above initial stall buffet. *1.  Stall

shall sound at no more than 12, and no less than 4 knots above initial stall buffet. *1.   Stall

11 Manual TEST lamp lights   TM 1-5855-265-20 3-3 3-2.  PREMAINTENANCE PROCEDURES INITIAL SETUP Tools Aircraft armament

s Protective Manual BEADING   TM 10-8415-206-12&P 3-10.  LINER This task covers: Inspection INITIAL SETUP Personnel Required ALSE

AH-1  boresight  must  be  adjusted  by  the armament  technician  after  the  initial  fitting,  every  120  days

Aircraft Army C-12F3 Aircraft Manual ARRIVAL BRIEFING   TM 1-1510-225-CL P-13 b.   Initial altitude. 2.   Departure Procedure

Manual 3-14.  Inner Visor Knob.   TM 1-8415-215-12&P 3-13.  Outer Visor Lock. INITIAL SETUP TABLE TOOLS MATERIALS

between 9 and 12 o'clock. DEPARTURE BRIEFING ATC CLEARANCE - REVIEW 1. Routing. 2. Initial altitude. DEPARTURE PROCEDURE - REVIEW

PROCEDURE TROUBLESHOOTING REFERENCE f. Windshield anti-ice operation - Check. The electrothermal windshield     will     prevent     initial     ice adhesion   to

Removal of Earcup   TM 1-8415-215-12&P 3-8.   Earcups and Earphones. INITIAL SETUP TABLE TOOLS MATERIALS

Manual 3-15.  ANVIS Mount Installation.   TM 1-8415-215-12&P 3-14.  Inner Visor Knob. INITIAL SETUP TABLE TOOLS MATERIALS

PROCEDURE TROUBLESHOOTING REFERENCE NOTE Illumination   of   the   AP   FAIL   annunciator   other than  during  initial  power-up  indicates  a

the microwave radiation hazard. DEPARTURE BRIEFING 1. ATC clearance - Review. a. Routing. b. Initial altitude. 2. Departure procedure

Manual APPENDIX A REFERENCES   TM 1-8415-215-12&P 3-20.  Touch-up Painting. INITIAL SETUP TABLE TOOLS MATERIALS

SPH-4B Manual 3-18.  Chafing Pad   TM 1-8415-215-12&P 3-17.  Cross Straps. INITIAL SETUP TABLE TOOLS MATERIALS

GUARD LOCK ASSEMBLY This task covers: a.  Removal c.  Replacement b.  Inspection d.  Installation INITIAL SETUP Tools Screwdriver, Flat

and 12 o'clock. DEPARTURE BRIEFING 1.  ATC clearance – Review. a.   Routing. b.   Initial altitude. 2.  Departure procedure

a turret   TM 1-5855-265-20 3-9 3-4.  MOVING TADS TURRET ASSEMBLY MANUALLY INITIAL SETUP Tools Aircraft armament

Flow of detergent/water solution   TM 1-5855-265-20 3-17 3-6.  CLEANING INITIAL SETUP Tools Maintenance platform

Leg Webbing For Freedom Of Movement G. Taking Off Vest 2-6. Initial Adjustments, Daily Checks, And

8415-206-12&P 3-8.  CHIN STRAP This task covers: a.  Inspection b.  Adjustment INITIAL SETUP Personnel Required ALSE

VISOR AND GUARD LOCK ASSEMBLY This task covers: a.  Inspection b.  Adjustment INITIAL SETUP Tools Screwdriver, flat

SPH-4B Manual 3-7.  Retention Assembly.   TM 1-8415-215-12&P 3-6.  Thermoplastic Liner. INITIAL SETUP TABLE TOOLS MATERIALS

Figure 3-4.  Retention Assembly Attachment Points   TM 1-8415-215-12&P 3-7.   Retention Assembly. INITIAL SETUP TABLE TOOLS MATERIALS

Manual HEAVY OBJECT   TM 1-5855-265-20 3-49 3-12.  PNVS TURRET ASSEMBLY INSTALLATION INITIAL SETUP Tools Aircraft armament

1680-359-10 Aircrew Survival Armor Recovery Vest Insert and Packets Manual 2-6.  INITIAL ADJUSTMENTS, DAILY CHECKS,  AND

in the test set. See fig. 2-3. (4) Check that tester switches are at initial positions as listed in

Manual INSTALLATION   TM 1-5855-265-20 3-28 3-9.  PNVS WINDOW COVER ASSEMBLY REPLACEMENT INITIAL SETUP Personnel Required 68X

Model CH-47 Helicopter Manual 2-3. GROUND LANDING INSTRUCTIONS   TM 55-1680-316-10 (1) Initial  activation  by  gravity  drop

Installation   TM 1-8415-215-12&P 3-5.   Energy-Absorbing Liner and Thermoplastic Liner. INITIAL SETUP TABLE TOOLS MATERIALS

unit from a type I or III reusable shipping and storage container. INITIAL SETUP Personnel Required 68X

REMOVAL - TYPE I   TM 1-5855-265-20 3-30 3-10.  RIM CLENCHING CLAMP REPLACEMENT INITIAL SETUP Tools 50-lb

4-13. Removing and Replacing Standard Components. a. Lining, helmet, shock (EAL). INITIAL    SETUP Tools/Equipment Personnel

AN/PRC-9O WARNING Set receiver to guard channel 243.0 for initial contact. Do   not   change

a. SURVIVAL VEST AND ARMOR Custom Search      2-6.  INITIAL ADJUSTMENTS, DAILY CHECKS,  AND SELF-TEST

Manual 3-12.  Dual Visor Assembly   TM 1-8415-215-12&P 3-12.  Dual Visor Assembly. INITIAL SETUP TABLE TOOLS MATERIALS

Leg Webbing For Freedom Of Movement G. Taking Off Vest 2-6. Initial Adjustments, Daily Checks, And

Condemned)  Tag  -  Materiel; or  DD  Form  1577-2,  Unservicable  (Repairable)  Tag  -  Materiel. 4-10.   Helmet   Sizing. INITIAL   SETUP General   Safety   Instructions

Install dust cap   TM 1-5855-265-20 3-39 3-11.  PNVS TURRET ASSEMBLY REMOVAL INITIAL SETUP Tools Aircraft armament

M45   CB   Mask TM-1-8415-216-12P Helmet System Aircrew Integrated HGU-56/P Manual INITIAL FITTING OF THE

11b.   Fitting   Procedure   for   HGU-56/P   with   the   M45   CB   Mask INITIAL    SETUP Materials/Parts General

specific  test  instruction,  set  the  controls  and  switches  to  their initial  positions  as  listed  in

4-12. Lining, Helmet, Shock (TPL) Custom-Fitting. Custom Search      INITIAL FITTING OF THE HELMET TM-1-8415

Refer to paragraph 3-7 to determine which optics are exposed during maintenance. INITIAL SETUP Tools Maintenance platform

4-20.  Strap  Assembly,  Chin Attachment   Points   TM    1-8415-216-12&P c. Strap assembly, chin. INITIAL     SETUP Tools/Equipment Screwdriver

3-5.  CORROSION INHIBITIVE SEALING AND COATING COMPOUND REMOVAL, APPLICATION, AND CURING INITIAL SETUP Tools Aircraft armament

quick way to check fuel and is recommended for an initial check of the

be allowed to stabilize at the potential test temperature.  The initial survey shall be made

c.  Shutdown  Procedure Custom Search      Table 2-2. Test Set Initial Switch Positions TM-55-4920-429-13 Aviation Intermediate Maintenance

Manual c. Strap assembly, chin.   TM   1-8415-216-12&P b. Lining, helmet, shock (TPL)/cloth. INITIAL   SETUP Tools/Equipment Shears

Manual 3-16.  ANVIS Goggles (attachment).   TM 1-8415-215-12&P 3-15.  ANVIS Mount Installation. INITIAL SETUP TABLE TOOLS MATERIALS

allowance   column.   Items   autho- rized for use as required, but not for initial stock- age  are  identified

23&P CHAPTER 2 MAINTENANCE INSTRUCTIONS Section I.  SERVICE UPON RECEIPT OF MATERIAL 2 - 1 .   INITIAL RECEIPT Each  survivor  kit

condition of iron carbide resulting from a spheroidizing treatment.  The initial structure may be either

nacelle  tank  to  be  consumed  by  the  engine  during  the initial  portion  of  the

the  allowance  column.  Items authorized   for   use   as   required   but   not   for   initial   stockage   are   identified   with

Section Vi. Painting And Marking Painting Procedure-Continued Painting Procedure-Continued Marking Procedures Marking Initial Setup Inspection Installation Retention

Section Vi. Painting And Marking Painting Procedure-Continued Painting Procedure-Continued Marking Procedures Marking Initial Setup Inspection Installation Retention

The  cargo  door  opening  is  52.0  inches wide  by  52.0  inches  high.    After  initial  opening  force  is applied

deteriorated and of doubtful condition should be replaced. 2-51.  The initial and succeeding

valve, causing it to move forward.  When the Beta valve reaches  its  initial  position,  oil  flow  to

celle tank to be consumed by the engine during the initial portion of the

nacelle  tank  to  be  consumed  by  the  engine  during  the initial  portion  of  the

other  components  of the  shop  set.  These  components  will  normally  be received  on  initial  shipment  in  boxes

Procedure. 4-11 .a Fitting Procedure for the HGU-56/P. INITIAL SETUP Materials/Parts HGU

scaling  of  all  input  signals  to  less  than  one- fourth of initial amplitude. With the

nacelle  tank  to  be  consumed  by  the  engine  during  the initial  portion  of  the

lever   to   the   Beta   valve   of   the governor.    The  initial  forward  motion  of

nacelle  tank  to  be consumed by the engine during the initial portion of the

at the top, provides cabin access for loading cargo or bulky items.    After  initial  opening  force  is  applied