Figure 4-8.--Squad position. Home Download PDF Order CD-ROM Order in Print AUTOMATIC RIFLEMAN Figure 4-10

Figure 2-66.--Firing the M79 from the standing position. Home Download PDF Order CD-ROM Order

service pistol-(A) assembled and (B) sectional view in recoil position. Home Download PDF Order

discussed further in this chapter. Battle Position Primary Fighting Position The battle position is where the

a standing or prone position. In the standing launcher cocks as it opens. position, place the butt

in Print Figure 4-5.--Principal direction of fire. Figure 4-8.--Squad position. Seabee Combat Handbook, Volume

the magazine rearward and upward until the magazine latch locks it into position (fig. 2-19). To

or other units can positively identified to company level. locate a gun position. The magnetic

not show). FIRE POSITION. --Push the safety across to the FIRE position (the red

in Print Figure 2-66.--Firing the M79 from the standing position. SMALL ARMS MAINTENANCE Mineman

according to the MRCs for the weapon. the SAFE position. Press in the

will discuss what forms Coordination of supporting fire a basic defensive firing position. Priority for performance

the barrel position. When the safety lever is in the SAFE position, socket. the bolt

little value to a unit in which the individual position. Seabee lacks proficiency in

line in placing the template opening in the right position  on  the  drawing

pistol with the safety in either the ON or OFF position. But for safety

the assembly, raise the barrel lock lever to the vertical position and remove

of operation. The mode of operation is determined by the position of the

the pilot.  All shiny items should be Except for the prone firing position, the basic

a misfire or hangfire, wait 10 CLOSED (slot parallel to the barrel) position (See seconds before you

4. Handguard assembly 1. Push the safety to the SAFE (back) position: 5. Operating rod and

to  the  given  line;  then,  holding  the straightedge firmly in position, slip the triangle

the firing pin and the spring from the slide. UP (safe) position. Depress the recoil

meters from under the muzzle. Drive the stake into a position and to

a single flight of you must consider the Seabee unit's position in helicopters

a and cover the portion of the company battle position patrol will cross into

The assault by the encircling units drives movement to a position outside the killing

try to run them returned to the deck. up simultaneously. Superior position: Any hoist or portion

6 by 6 truck should not exceed 13 (fig. 5-2). CONVOY COMMANDER The position of the

must be in the rear (cocked) shown in figure 2-55. position before you can close

slope of 1 to 8 works well for the inclined  position. By  shifting  your  body

PDFs. The sketch or overlay includes the following: Prepare fighting positions. Squad primary position and sectors

FEBA or the defensive line   when   them   are  no   visible   targets  of � Position of the

to have a TA-312/PT (field phone) at each squad leader's fighting position or crew-served weapon

a the rifle companies assigned as FOs must be able to defensive position and the

Remington M870 shotgun, and the M79 grenade selector for automatic operation. Position the selector

from Do not mix DS2 and STB because mixing the your fighting position will also lower the

Equipment). The (SB-22/PT) located in the platoon commander's fighting position. The platoon

short  radius portion  of  the  line  to  be  drawn.  Change  your position   around   the   drawing

degree mark that falls on the side. To lay off an angle,  position  the  protractor

C), then take a couple of turns and holds its position (fig. 4-23). against

proceed as follows: 1. Depress the rear sight to the lowest position and turn

2-9) because   its   heavy   weight   helps   keep   the straightedge  exactly  in  position.  The  steel

which is floated over its place  of  location,  and  then  sunk  into  position.  A monolithic

bolted together. Because  the  faces  are  flush,  the  members  easily  slide into position, which reduces the

consists  of  two  parts: (1) horizontal control , which locates the horizontally fixed   position   of   specified

the Key terrain reserve area and add depth to the defensive position. Observation and fields

The stern line runs changed accordingly. When the ship is in position and through

consists  of  two  parts: (1) horizontal control , which locates the horizontally fixed   position   of   specified

of  the  road  and  shows  what  you should see from a position directly above. The

distribution plans, and electrical details should leave you in a better position to aid

DASC) personnel defense. need to dispatch a helicopter to your position. In a

Navigation    25      26      27      28      29   30   31      32      33      34      35    the correct position on the ends

feed tray groove. After the bolt reaches its fully forward and locked position, the operating

hook of the halyard. the victim, but the victim's position relative to the

B). Bush the barrel upward until it latches in the closed position. The pistol

the first candle is nearly not launch it, securely retape the pull ring into position burned out, a

the color of smoke; ask the pilot to acknowledge POSITION IS AT YOUR NINE

sketch. Home Download PDF Order CD-ROM Order in Print Figure 4-8.--Squad position. Figure 4-12.--Mutual

of  the  road  and  shows  what  you should see from a position directly above. The

Steaming Orders (sample). replacement.  Include  the  mark,  modification,  and  serial ship’s position and headings

area. Where possible, those of manila line. This causes the safety precautions position line handlers a

The hose hangs from trolley blocks that ride along the span wire. Saddle whips position the hose

Awning hooks make canvas easy to install and remove. To position these hooks and

removed by steam through vaporization. Finally, for moved to a concealed position. Vehicles will remain some

the cuts and fills. They are also in a vertical position. The grade

the holster and hold it at the IMMEDIATE ACTION raised pistol position. Insert a magazine

charging handle and the bolt is forward in the unlock position. Push forward on the

charging handle is eased --Release the charging handle forward from the open position, the bolt

right side next to the ammunition pouch. This is the preferred position. Onto the webbing

service pistol-(A) assembled and (B) sectional view in recoil position. Figure 3-35.--Barrel

service pistol-(A) assembled and (B) sectional view in recoil position. Figure 3-31.--Recoil

the receiver (the safety lock must be in the FIRE position) and engage

positions. Figure 4-5.--Principal direction of fire. AUTOMATIC RIFLEMAN Figure 4-8.--Squad position. Figure 4-10.--Squad

invert the cylinder in a near vertical RACK FOR position; otherwise set it horizontally

may 3-38). ignite and cause injury. REAR SIGHT.� In each firing position (prone, standing, kneeling, and

pin Mk 11 Weapons Dolly secures the latch in the locked position. A lifting

particular The CSSE varies in size from a MAU service position because of intervening

a drill, the diameter of the wheels the OFF position before connecting the

equipment. the holes; otherwise, the slide is in the WRONG position, as shown in

be such that if you desire to work in a standing position, you can do so

a beam. The slide-mounted attachments can be locked in any desired position on the beam

the grid of 7. Terrain Features: Draw only those terrain the gun position is recorded next to

laid  out  end  to  end,  hold the scale in one position and add

of the hammer and holds it in a cocked position. remains in position

the platoon. During leader/gunner, assistant gunner, ammunition carrier combat, he takes up a position in the

distribution plans, and electrical details should leave you in a better position to aid

primary duties and responsibilities of personnel in the Damage position in the

figure 2-2. Cognizance Symbol A cognizance (control) symbol is a two-position alphanumeric code that is

to side at the base of the fire. One AFFF position and get

an ambush is nearly always an unexpected encounter. immediate flanking attack on the enemy position, using Counter ambush drills

with the ship's operation by reducing the 3. The position of the

provides an airtight seal when the canister is in the operating position in the

bolted together. Because  the  faces  are  flush,  the  members  easily  slide into position, which reduces the

open end of the the hammer downward past the cocked position. After receiver, ensuring that

hold  the  legs  of  the  compass in a set position. One of the

or a senior enlisted man. He is normally placed in a position of line

cover effectively with fire from a given military movement.   Entanglements are set up as position. When you are selecting

fire. The base of the symbol indicates the weapon's position. AII-4 Technology News

use all of the available are obviously in the best position to provide